• Tile Floor Heater UL Approved E481865
  • Tile Floor Heater UL Approved E481865
  • Tile Floor Heater UL Approved E481865
  • Tile Floor Heater UL Approved E481865
  • Tile Floor Heater UL Approved E481865
  • Tile Floor Heater UL Approved E481865

Tile Floor Heater UL Approved E481865

Certification: Ce, SAA
Width: 0.3 to 0.5m
Power: 80W to 250W/Square Meter
Voltage: 12 V to 240V
Usage: Heat
Type: Heating Mat
Samples:
US$ 1/Piece 1 Piece(Min.Order)
| Request Sample
Customization:

Contact Supplier

Gold Member Since 2011

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
SHIHM-160W-240V
Material
PVC or FEP Coated
Operating Principle
Conduct Heat
Brand
Senphus
Transport Package
Carton, Spool
Specification
SGS
Trademark
Senphus
Origin
Jiangsu, China (Mainland)
HS Code
85168000
Production Capacity
50000 Piece/Pieces / Quarter

Product Description

Tile FLoor Heater UL Approved E481865

Heating mat is a good floor  heating system. It is easy to install and is suitable for various floor decorative materials, whether it is concrete floor and wood flooring, or the old tiles floor or terrazzo floor. It is installed in the tile adhesives and almost doesn't affect the floor elevation. Anze heating mat can be directly laid on the original floor without any treatment to the original floor. Meanwhile, the thin preheat layer can offer you the desired floor temperature 20-30 minutes after the system is activated. Therefore the fast heating system is the best choice for rooms such as bathroom. It is applicable to the overall heating, comfort heating, wall heating, strict demands of floor height and renovation.

Floor Heating System Specification
Model V W Ohm M2
         
SHIHM-160-1.0M2 240 160 360.0  1
SHIHM-160-1.5M2 240 240 240.0  1.5
SHIHM-160-2.0M2 240 320 180.0  2
SHIHM-160-2.5M2 240 400 144.0  2.5
SHIHM-160-3.0M2 240 480 120.0  3
SHIHM-160-3.5M2 240 560 102.9  3.5
SHIHM-160-4.0M2 240 640 90.0  4
SHIHM-160-5.0M2 240 800 72.0  5
SHIHM-160-6.0M2 240 960 60.0  6
SHIHM-160-7.0M2 240 1120 51.4  7
SHIHM-160-8.0M2 240 1280 45.0  8
SHIHM-160-10.0M2 240 1600 36.0  10

Tile Floor Heater UL Approved E481865
Tile Floor Heater UL Approved E481865

Floor Heating Systems Installation Guide

1.Divide the floor into a series of rectangles. From these measurements you can calculate how many mats you'll need and what sizes. Exclude permanent or static fixtures from your calculations.  If the floor is self-levelling compound over concrete.
2.
Lay the first run. At the end of the run cut the mat leaving the cable intact, turn the mat through 90 or 180 degrees and continue laying. When the area is covered, adjust the mat until the loops are equal distance apart. Now stick the mat to the sub floor using the special tape bands.
3.
Lay the temperature probe from the programmable thermostat onto the floor centered between two of the cable loops and secure it to the floor surface. Now take the unheated power lead from the end of the matting system which should be positioned near the thermostat. Refer to the installation manual for testing instructions and readings.
4.
Either lay a thin, self-levelling compound over the mat and leave it to dry before laying tiles or trowel flexible tile adhesive directly over the mat and lay the floor tiles. Once the grouting is complete let the tile adhesive cure before switching on the system.
Tile Floor Heater UL Approved E481865

 

Send your message to this supplier

*From:
*To:
avatar Mrs. Senphus
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now