Pipe Anti-Freeze Protect Heating Cable GS and Ce Certificate

• Customization: Available
• Type: PVC
• Conductor Type: FEP PVC
• Model NO.: JYSH
• Application: Heating
• Conductor Material: Alloy
• Sheath Material: PVC
• Insulation Material: XLPE
• Material Shape: Round Wire
• Range of Application: LSOH
• Certification: ISO9001, CE
• Brand: Senphus
• Power: 16or17-976
• Length: DIY
• Transport Package: Caton-Woodcase-Pallet-Colourbox-White
• Specification: 1-48M
• Trademark: SENPHUS
• Origin: China
• HS Code: 85168310
• Production Capacity: 8000/Mouth
• Package Size: 50.00cm * 46.00cm * 35.00cm
• Package Gross Weight: 20.000kg
• Lead Time: 20 days (1 - 5000 Rolls) ; To be negotiated ( > 5000 Rolls)

Product Description

   pipe anti-freeze protect heating cable GS and CE certificate

Senphus Pipe anti-freeze protect heating cable is from 1m to 49m usually, and we have exported them to Europe and North America for many years.The 6 to 13 degree thermostats can control the temperature of the heating cable and will save more power.



  

 

No.	Model  (Article)	Length(M)
1	1M-17W	1m
2	2M- 32W	2m
3	4M-64W	4m
4	8M-128W	8m
5	12M-192W	12m
6	14M-224W	14m
7	18M-288W	18m
8	24M-384W	24m
9	36M-576W	36m
10	37M-629W	37m
11	49M-784W	49m

 

 

 

calibre	15mm	22mm	28mm	35mm	42mm	48mm	60mm	76mm
Without pipe insulation	-20°C.	-13°C.	-10°C.	-7°C.	-5°C.	-4°C.	-3°C.	-2°C.
With 13mm pipe insulation	-45°C.	-45°C.	-40°C.	-40°C.	-35°C.	-30°C.	-25°C.	-20°C.

 

Installation: 

1. first unwind the heating cable. The cable must never be connected to the power line when it is wound up.
2. if the cable is too inflexible because of low temperatures, unwind it and put it for some minutes into the plug.
3. afterwards you can pass the cable.
4. the area around the pipe where you want to connect it with the cable must be accessibly and non-attached.
5. the heating cable can not be passed behind walls
6. put the thermostat with the round black contact area tightly on the coolest point of the pipe and fix it with insulating tape.
7. finally put the whole cable on the pipe and fasten it every 30~60cm with insulating tape.
8. attention: the cable must be fastening straight on the pipe
9. now you can check if your cable works.
10. afterwards insulate the water pipe and the heating cable with mineral rock wool or foam. Attention: never use more than 13mm of this material to insulate.
11. in general the heating cable must be protected against mechanical damage or biting.
12. the heating cable can not be put into liquids.
13. finally plug the cable into a 230V main plug.