Frost Protection Cable Anti-Freeze Pipe Cable Heat Tracing Cable GS Ce Approved

• Customization: Available
• Certification: CE, GS
• Type: Heating Cable
• Model NO.: SHPT-16W/M-230V
• Form: Heating Wire
• Shape: Flat
• Thermostat: 6 to 13 Degree
• Heating Wire Shape: Flat
• Coated: PVC
• Power Line: 2m,Black
• Diameter: 5*13.2mm
• Voltage: 230V
• Heating Cable Type: Two Conductors
• Insulation: XLPE
• Protection Degree: Ipx68
• Power: 16W/M
• Transport Package: Color Box, Neutral Carton
• Specification: GS, CE
• Trademark: Senphus
• Origin: Wuxi
• HS Code: 85168000
• Production Capacity: 5000 Pieces Per Day

Product Description

Frost Protection Cable Anti-freeze Pipe Cable Heat Tracing Cable GS CE Approved 
Senphus antifreeze water pipe heating cable are mainly for North America and Europe.
We have UL, GS and CE certificate (according to the new rule of EMV-Directive 2014/30/EU) at present.

Feature
1. The length of  Antifreeze Water Pipe Heating Cable are from 1 m to 49m
2. Input Voltage: 230V-50/60 Hz
3.Rated Power: 16W/M
4.Length of Power Cable 2m with Thermostat 3 to 16 degree (blue,green and orange etc),Self-regulating cable
5.Safe and Energy Conservation


 

Frost-proof water pipes with this heating cable

calibre	15mm	22mm	28mm	35mm	42mm	48mm	60mm	76mm
Without pipe insulation	-20°C.	-13°C.	-10°C.	-7°C.	-5°C.	-4°C.	-3°C.	-2°C.
With 13mm pipe insulation	-45°C.	-45°C.	-40°C.	-40°C.	-35°C.	-30°C.	-25°C.	-20°C.

 Antifreeze Water Pipe Heating Cable Specification

No.	Description	Power(w)	Color	Voltage
1	1m	16	black	230v
2	2m	32	black	230v
3	4m	64	black	230v
4	8m	128	black	230v
5	12m	192	black	230v
6	14m	224	black	230v
7	18m	288	black	230v
8	24m	384	black	230v
9	37m	592	black	230v
10	49m	784	black	230v
Note:	16w/m; power cord:2m,230v

Installation: 
1 first unwind the heating cable. The cable must never be connected to the power line when it is wound up.
2 if the cable is too inflexible because of low temperatures, unwind it and put it for some minutes into the plug.
3 afterwards you can pass the cable.
4 the area around the pipe where you want to connect it with the cable must be accessibly and non-attached.
5 the heating cable can not be passed behind walls
6 put the thermostat with the round black contact area tightly on the coolest point of the pipe and fix it with insulating tape.
7 finally put the whole cable on the pipe and fasten it every 30~60cm with insulating tape.
8 attention: the cable must be fastening straight on the pipe
9 now you can check if your cable works.
10 afterwards insulate the water pipe and the heating cable with mineral rock wool or foam. Attention: never use more than 13mm of this material to insulate.
11 in general the heating cable must be protected against mechanical damage or biting.
12 the heating cable can not be put into liquids.
13 finally plug the cable into a 230V main plug.

We can do the product without thermostats(6 to 13 degree), because there are very heavy snow in winter in some Europe place, then the customers need more heat pipe heating cable, and we suggest the pipe heating cable without thermostats one.