Factory Direct Sale Heating Cable Underfloor Heating Foil

Type: Insulated
Conductor Type: Stranded
Application: Heating, Underground
Conductor Material: Alloy Wire
Sheath Material: PVC
Insulation Material: XLPE
Customization:

Contact Supplier

Gold Member Since 2011

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
SHDN-15
Material Shape
Round Wire
Range of Application
LSOH
Certification
ISO9001
Brand
Senphus
Product Name
Factory Direct Sale Heating Cable Underfloor Heati
Underfloor Heating Foil Color
Blue, Orange, Red, Green, or Customized
Underfloor Heating Foil Certificate
CE SAA
Underfloor Heating Foil Power
90W/M2, 100W/M2, 130W/M2, 150W/M2, 160W/M2, 170W/M
Underfloor Heating Foil Length
1~30m
Underfloor Heating Foil Width
0.5m
Underfloor Heating Foil Cable
Twin Conductor
Cold Cable Length
2m, 3m, 4m, etc.
Heating Cable Color
Blue, Red
Transport Package
Carton, Pallet, Wooden Box
Specification
CE SAA UL
Trademark
SENPHUS
Origin
China. Jiangsu. Jiangying
HS Code
85168360
Production Capacity
10000/Mouth

Product Description




          The paper about  electric heating mats
 
Resistance tolerance:-5%~+10%
Conductor Insulation: Teflon FEP
Sheath Insulation Aerial: Teflon
Core conductor material: Nickel Copper Alloy
Screen: Aluminum foil and Tinned Copper
 
 
 
Technical Data
 
Heat Mat Technical Date
 

Type

Rated power

Mat size

Heated area

W

m*m

Square meter

SHDN-150-1.0M2

150

0.5*2

1.0

SHDN-150-1.5M2

225

0.5*3

1.5

SHDN-150-2.0M2

300

0.5*4

2.0

SHDN-150-2.5M2

375

0.5*5

2.5

SHDN-150-3.0M2

450

0.5*6

3.0

SHDN-150-3.5M2

525

0.5*7

3.5

SHDN-150-4.0M2

600

0.5*8

4.0

SHDN-150-4.5M2

675

0.5*9

4.5

SHDN-150-5.0M2

750

0.5*10

5.0

SHDN-150-6.0M2

900

0.5*12

6.0

SHDN-150-7.0M2

1050

0.5*14

7.0

SHDN-150-8.0M2

1200

0.5*16

8.0

SHDN-150-9.0M2

1350

0.5*18

9.0

SHDN-150-10.0M2

1500

0.5*20

10.0

SHDN-150-12.0M2

1800

0.5*24

12.0

 
 
 
 
 
Installation advice
 
All electrical wiring must be done by a fully qualified electrician and in accordance with the current IEE.
 
The insulation Board must be installed if you have a wooden substrate.It is also commendatory with concrete substrates to optimize efficiency and reduce warming times(up to 50% more thermally efficient).
 
Always round down your floor space area e.g.2.6m²of floor will require 2m²of matting (To avoid surplus matting).
 
Never overlap the mat ,always ensure a min.50mm spacing between the wires for optimum heat distribution.
 
If there is a matting shortfall in your floor space then concentrate the heat mat in heavily trafficked areas.
 
A Residual Current Device (RCD) should be used with this system (must be bought separately).
 
Floor must be clean and free from dust &dirt.
 
Never cut the red wire or join two or more mats together in series, use a junction box.
Only use scissors when cutting the mesh.
 
The wire is tough but extra care must be taken when using sharp objects near the mat. A plastic trowel is advisable.
 
Check your system with a mufti-meter before tile installation.
 
Ensure your tile adhesive is suitable for use with under tile heating e.g.highly polymer modified (flexible).
 
Your substrate and floor covering,e.g.tile adhesive or screed, must be comm.\Katelyn dry before switching on your system for the first time.
Wear gloves when handing the mat (to avoid irritation to skin).
 
Take care when tiling to ensure you do not dislodge or damage the wire from the mesh mat.
 
The insulation board is not suitable for floor strengthening and structural reinforcing.
 
Matting and Insulation Board should not be passed under permanent fixings e.g.bath,toilet etc.
 
Do not store objects on top of the matting during installation e.g.tiles.
Remove old floor coverings
 
 
Installation Checklist
Sensual mat (with supplied protective tube)
Sensual Thermostat(LCD or Manual).
Temperature Sensor Cable (supplied in Thermostat box.).
Insulation Board.
Glass Fib re Tape
Mufti-meter
Residual Current Device (RCD(recommend 30Ma)*
Electrical trunking or conduit to house power lead.*
Electrical back box and junction box (if required)*
Measuring tape and marker pen*
Scissors*
Gloves*
Junction Box (required if joining multiple heat mats)*
This Box Contains
 
Sensual Mat
Protective tube
Warranty Information
 
 
Other Sensual Products Required
Sensual Glass Fib re Tape
Sensual Insulation Board
(LCD or Manual)
 
Adjusting the mat
Don't worry if your floor plan is not completely square. The matting can be easily adapted and shaped but remember
DO NOT cut the red wire!
Loose wire can be fixed in place using Glass Fibre Tape .
 
 
Step 1: Prepare&Measure
(a)Substrate Preparation
Use a highly polymer modified(flexible)conscientious floor adhesive suitable for under tile heating systems when installing the insulation boards and the tiles.
Wooden seafloors:
 
 
 
All floor boards must be secure,level and fixed firmly with screws. If not level then use a self-belling compound or overlay with plywood. The insulation boards are not a strengthening material and should only be used on a sound, flat and digit substrate.
Concrete seafloors:
 
 
The concrete floor should be level and completely cured,if new. The floor should be clean and dust free.
The floor should be structurally sound and free from damage.
 
Bathroom Example:
(b)Make a plan
Always round down your floor area e.g. For a floor area of 2.6m2 you will require 2 m2 of heat mat(to avoid surplus wire)Draw a plan of your room with measurements and all floor fitting objects e.g. Cupboards, bath etc.Calculate the free floor space so you know which size mat or combination of mats you will need.
Mark on your plan where your thermostat will go, and therefore where your matting will start from, and continue to draw a plan of how your matting will be laid.
Electrical wiring regulations prohibit thermostats being installed in bathrooms;if you are using the system in a bathrobe then install the thermostat on an internal wall outside the bathroom as close to matting power supply cables as possible.
 
(c)Mark the floor and mat
Any floor preparation e.g. Belling,reinforcing or laying of Insulation Board(recommended) should be done prior to marking.
Mark the floor where permanent objects and the thermostat are going.Using your plan,roll out the mat(remember your gloves!)from your thermostat point,without removing the printed backing tape and mark the points where the mesh will have to be cut for turning the mat or where the mesh may have to be removed from the red wire to be applied loose into narrow areas.
Draw the planned route on the floor, for any loose wire sections,maintain the min.50mm spacing.Loose wire can be fixed in place using Glass Fib re Tape
Plan the location of the heat sensor.
 
Step2: Heat Control
Select either LCD or Manual thermostat
Optimum efficiency
LCD can be programmed for convenience
Refer to thermostat instructions for fitting and technical information
 
(a)Plan, Measure &Cut
Measure the room to calculate number of boards, To cut the boards, simply score through the top layer with a utility knife and snap.The boards should be installed in a staggered pattern(see picture 1).Substrate must be clean, dry and free from dust before installing
 
(b)Install&Fix
Boards must be installed with flexible powder based tile adhesive suitable for under tile heating.Use a notched floor trowel to apply a bed of adhesive to your substrate(Trowel in one direction to avoid air pockets)
Work a board at a time and firmly press down to ensure no air pockets.When adhesive is completely dry apply Glass Fib re tape to edges of board(see picture 2).
 
Step 4: Lay Matting
(a)Adjust the mat
Using your markings on the floor and the mesh, with scissors carefully cut the mesh at the necessary points; DO NOT cut the red wire!Ensure the wire is kept min.50mm apart for optimum heat distribution.Refer to the adjustment guide on the reverse for help on turning the mat
 
(b)Prepare for the floor sensor
Check the mark on the floor you made for the location of the sensor(leave enough excess cable to reach the thermostat).The sensor should be under the mat in the middle of two heating wires and 350mm into the heated area,although not directly over heating pipes beneath the floor.A small channel maybe needed in the floor to accommodate the tube(in heat mat box),which protects the sensor.Thread the floor sensor through the tube and tape over the end to stop any adhesive entering.
 
(C)Stick the mat down
Working from the thermostat,start to stick the matting down by removing the printed backing tape from the matting and firmly pressing down,Secure the sensor with eight tape or tile adhesive, ensure that it does not cross any heating wires.
Sections d-e Essential for your warranty
 
(d)Connecting up(By the Electrician)
Install the thermostat as per the instructions in is box and run the power lead through the electrical protective casing/conduit(not supplied)up the wall, with the floor sensor, to the thermostat.
 
 
(e)Testing the mat(By he Electrician)
Test the mat and sensor with a mufti-meter,check the readings with the data tables on the relevant instructions and write this data on the warranty application form.Before tiling, turn on the system and run for approx 10 ins to ensure the wire heats evenly.
 
 
The wire is tough enough to withstand light foot traffic but plastic sheeting or cardboard should be overlaid if the mat will be exposed for any period of time to protect the wire from being damaged by foreign objects or being dislodged from the mesh.
 
 
Step 5: Tile
Using self-belling compound:
A flexible tile adhesive suitable for under floor heating must be used. This option gives you a smooth flat base to tile onto whilst protecting the wire when tiling.Simply mix the compound and pour over the mat to a depth that covers the wire making sure there are no air bubbles or voids.Allow to fully cure and then tile.
 
Using tile adhesive:
A flexible powder based tile adhesive that is suitable for under tile heating must be used.Working on a small area at a time, with a rubber backed trowel apply a layer of adhesive over the heat mat ensuring complete coverage of the wire with no air pockets and voids, alloy this layer to set, apply a second layer of adhesive with a suitable notched trowel(preferably plastic)and apply the tiles.
 
 
IMPORTANT:ENSURE THAT THE TILE ADHESIVE AND GROUT IS FULLY CURED AND DRY BEFORE TURNING ON THE HEATING SYSTEM FOR THE FIRST TIME.READ MANUFACTURES GUIDELINES FOR DRYING TIMES.
 
 
FAQs
Is there a guarantee?
There is a 15 years guarantee on the mat and 2 years on the thermostat.To validate your warranty the necessary form must be filled in and sent to us, which can be found in the Heat Mat or Thermopylae box.
 
Can this heating system be used under laminate/wooden floors?
Sensual system has been specifically designed for under tile applications and is not recommended for under real wood, laminate or carpet floor coverings
 
Can I install it myself?
Yes the mat is very easy to install, but the route of the mat and position of the thermostat must be carefully planned before you start.A fully equality electrician is required to make the electrical connections to the thermostat.
 
Why can't I turn my heating on as soon as the tiles are down?
If you turn on the heating system before the tile adhesive or grout are fully cured and dry,the moisture will be forced out too quickly and cracks may occur.If you have a concrete substrate then this must also be completely dry before the heating mat is installed.
 
The picture of our compeny
 
 
 
 
Email to this supplier
To:  
senphus jy
*Message:  
Your message must be between 20-8000 characters
Quantity:  
 
  
Recommend matching suppliers if this supplier doesn't contact me on Message Center within 24 hours. AliSourcePro
  
 
 
Related Products
 
warm fllor heating wire
 
underfloor cabon fibre electrical h...
 
electric heated floors
 
car seat heating wire
 
car seat heating wire
Related Keywords
room flooor heating cable
diy mat cable underfloor heating system
electric heating mats
Verified Supplier   -  Jiangyin Senphus Electrical Material Co., Ltd.
 
China (Mainland) | Manufacturer, Trading Company | Contact Details
Experience:
Established 2002
10 years OEM
Performance:
24.4% Response Rate
1 Transaction for US $1,000+ in 12 months
 
 
Product Showcase
Product Categories
Underfloor Heating mats
Pipe Heating Cable
Roof & Gutter deicing heating cable
Heating Cable
Silicone Rubber Heater
Resistance Heating Wire
In-pipe heating
UL blanket heating wire
Heating Wire Cable
Resistacne Heating Ribbon and Strip
Thermostat and sensor
Fabric undefloor heating mat
Ungrouped
Main Products
 
 
Adhensive under floor radiant floor...
 
Factory direct sale heating cable u...
 
electric heated floors
 
floor cables and wires
 
 
Communicate with Supplier
What can I do for you?
Contact Supplier
senphus jy
Browse by:Manufacturers - Wholesalers - China Gold Suppliers - All Products - Countries - Importers - Buying Leads - China - India - UK - Australia
Language Option:Español - Português - Deutsch - Français - Italiano - P - - - 
Alibaba Group: Alibaba China - Alibaba International - AliExpress | Taobao Marketplace | Tmall.com | eTao | Juhuasuan | Alibaba Cloud Computing | Alipay
Product Listing Policy - Intellectual Property Policy and Infringement Claims - Privacy Policy - Terms of Use
Copyright Notice © 1999-2015 Alibaba.com Hong Kong Limited and licensors. All rights reserved.
Minisite Survey
 
 
 

Send your message to this supplier

*From:
*To:
avatar Mrs. Senphus
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now